UTP Cat6, спаян.пары, 23AWG, PVC, о.ж./ (Belden/7812E)

UTP Cat6, спаян.пары, 23AWG, PVC, о.ж./7812Е (Belden/7812E)

Application

• Horizontal and building backbone cable.
• Support current Category 5, Category 5 enhanced and future Category 6 applications, such as: 10 Base-T, 100 Base-T, 1000 Base-T (Gigabit Ethernet), FDDI, ATM

Standards

• General standards:
• Future standards like:
• ISO/IEC 11801, EN 50173, TIA/EIA 568-A-5 enhanced
• ISO/IEC 11801 2^nd edition, EN 50173 2^nd edition und prEN 50288-3-1

Construction & Dimensions

• Construction:
• Conductor:
• Conductor diameter:
• Conductor insulation material:
• Diameter over insulation:
• Jacket material:
• Outer diameter:

Unshielded 4 twisted pairs solid bare copper AWG 23 (0,57 mm) Polyethylene (PE) 1.05 mm ± 0.05 mm PVC (Flame retardant) 6.5 mm ± 0.3 mm

Colour code

• Pair 1   White-Blue/Blue
• Pair 2   White-Orange/Orange
• Pair 3   White-Green/Green
• Pair 4   White-Brown/Brown

Electrical characteristics (at 20 єC)
Attenuation

NEXT (Near end crosstalk)

Frequency	1	4	10	16	20	31.2	62.5	100	155	200	250	MHz
Spec. (Min.)1)	65	65	59	56	55	52	47	44	41	40	38	dB/ 100m
Typical	80	76	70	67	66	63	58	55	51	49	45	dB/ 100m

Power sum NEXT

Frequency	1	4	10	16	20	31.2	62.5	100	155	200	250	MHz
Spec. (Min.)1)	65	65	57	54	53	50	45	42	39	38	36	dB/ 100m
Typical	78	74	68	65	64	61	56	53	49	47	43	dB/ 100m

Power sum ELFEXT

Frequency Spec. (Min.)² Typical

ACR

1	4	10	16	20	31.2	62.5	100	155	200	250
64	64	46	41	40	36	30	26	22	20	18
70	64	57	51	49	45	39	35	31	29	27

Power sum ACR

¹⁾: Specification values according to cable requirements of ISO/IEC 11801 category 6

²⁾: Specification values according to cable requirements of ANSI/TIA/EIA-568-A-5 (enhanced)

MHz dB/ 100m dB/ 100m

Frequency	1	4	10	16	20	31.2	62.5	100	155	200	250	MHz
Spec. (Min.)1)	61.0	61.0	53.0	48.4	46.5	41.3	31.05	24.01	15.07	10.09	5.0	dB/ 100m
Typical	78.2	72.5	64.3	59.7	57.8	52.6	42.9	35.6	26.07	21.05	14.02	dB/ 100m
Frequency	1	4	10	16	20	31.2	62.5	100	155	200	250	MHz
Spec. (Min.)1)	58.0	58.0	50.0	45.4	43.5	38.3	28.05	21.01	12.07	07.09	2.0	dB/ 100m
Typical	76.2	70.5	62.3	57.7	55.8	50.6	40.9	33.6	24.07	19.05	12.02	dB/ 100m

Belden Wire & Cable B.V. Netherlands Tel. +31-(0)77-3878-555 or Fax. +31-(0)77-3878-488 or E-mail: sales.info@belden.nl All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Technical specifications and printing errors are subject to change without notice.

Product Datasheet
P/N - 43176 Rev.3A Page 2 of 2 Date 01-08-2001
Belden 7812E CAT 6 UTP PVC
Electrical characteristics (at 20 єC)
Nominal mutual capacitance at 1 kHz
Maximum conductor DCR
NVP - Nominal Velocity of Propagation
SKEW – Propagation delay difference (100 MHz)
Impedance         1 - 100 MHz
Impedance     100 - 250 MHz
50 nF/km
77 Ohm/km
0.70 c
typical < 15 ns/100m
100 ± 15 Ohm
100 ± 18 Ohm
General and environmental characteristics
Temperature range - operation
Temperature range - installation
Minimum bending radius - operation
Minimum bending radius - installation
Maximum pulling tension
Flame retardancy
Energy of flame
Weight (approx.)
Maximum operating voltage
Maximum continuous current per conductor (25°C)
-20°C - +60°C +0°C - +50°C 26 mm 52 mm 80 N
IEC 332-1 555 kJ/m 43 kg/km 48 V rms 1.4 A
Ordering information
MARKING
Text on the cable jacket
Inkjet printing
BELDEN 7812E UTP CAT6 4PR AWG23 ISO/IEC 11801 EN 50173 VERIFIED 100 OHM
Meter marking:
JACKET COLOUR
Colour
Grey Blue
Yes
RAL code
RAL 7032 RAL 5015
Belden colour code 3136 3135 PACKAGING (PUT UP)

Belden code	Delivery length	Weight	Remark
43176 xxxx 179	305 m	13 kg	Unreel box
43176 xxxx 079	305 m	13 kg	Non returnable reel
43176 xxxx 240	500 m	23 kg	Non returnable reel
43176 xxxx 241	1000 m	43 kg	Non returnable reel

xxxx: Belden colour code